CalculatorAI
Aggregate Calculator
landscapeMaterial & Dimensions
Density: 2550 lbs/yd³
local_shippingEstimated Quantity
Total Weight
-- Tons
calculate
Enter dimensions
Calculate Gravel, Sand & Stone
Ordering aggregate like gravel, crushed stone, or sand is often done by weight (tons) rather than volume. However, you measure your project area in feet. Our Aggregate Calculator bridges this gap, converting your dimensions into estimated weight based on material density.
Common Material Densities
Different materials have vastly different weights for the same volume. A truckload of mulch is much lighter than a truckload of wet sand.
- Gravel (Dry): ~2,550 lbs per cubic yard.
- Crushed Stone: ~2,700 lbs per cubic yard.
- Sand (Wet): ~3,300 lbs per cubic yard.
- Mulch: ~800 lbs per cubic yard (lightweight).
How to Calculate
- Measure the Length and Width of the area you want to cover in feet.
- Decide on the Depth (thickness) of the layer in inches.
- Select your Material to apply the correct density factor.
Formula: (Volume in Cubic Yards) × (Density in lbs/yd³) ÷ 2000 = Tons
help Frequently Asked Questions
How much does a yard of gravel weigh?
A cubic yard of typical gravel weighs approximately 2,500 to 2,800 lbs (or 1.25 to 1.4 tons), depending on moisture content and stone size.
How do I convert Cubic Yards to Tons?
Multiply your cubic yards by the material's density (in lbs per yard), then divide by 2,000. For example, 2 yards of gravel × 2700 lbs = 5,400 lbs. Divided by 2,000 = 2.7 Tons.